Square-Clamps-(Flat-Conductor-and-Hot-Stamped-Design)Square-Clamps-(Flat-Conductor-and-Hot-Stamped-Design)Square-Clamps-(Flat-Conductor-and-Hot-Stamped-Design)
Square-Clamps-(Flat-Conductor-and-Hot-Stamped-Design)

Lightning Protection System

Fittings

Square Clamps (Flat Conductor and Hot Stamped Design)

Brand:Kingsmill
CONDUCTOR SIZE (mm)CONDUCTOR MATERIALWEIGHT (kg)PART NO.QuantityAdd To Baskit
25 x 3Aluminium0.05SQCAF253
25 x 3Copper0.15SQCCF253
25 x 6Copper0.19SQCCF256
31 x 3Copper0.22SQCCF313
31 x 6Copper0.22SQCCF316
40 x 6Copper0.79SQCCF406
50 x 6Copper0.35SQCCF506

Product Information:

Square Clamps are designed for a four-way connection and are suitable for crossing over tapes, straight through joints, or ‘T’ connections to form a continuous network of tapes. Countersunk hole in the base for fixing the clamp in place.BS62305 hot-stamped design is a new feature to our original Square Clamps (Flat Conductor).

Features:

Material: Aluminium/Copper AlloyStandard: BS:EN 62561-1, Class HTightening torque: 6Nm

More Information:

Square Clamps permit neat joints on PVC covered lightning protection conductors due to the recessed lid.

When choosing a connector it is important to ensure:

  • The connector is mechanically robust.
  • The connector is selected according to its application.
  • The connector is rated for its application.
  • To avoid bimetallic corrosion: use a bimetallic connector (do not connect bare copper directly to bare aluminium, or have water run-off from copper fall onto aluminium).