| Height when raised | 500-1000 mm |
| Color | RAL1028 traffic yellow / RAL9005 black |
| Axle load resistance | 50 tons per axle |
| Structure | Heavy duty |
| Top plate | Plain, painted yellow with black stripes |
| Type of steel | S235 |
| Traffic light | Red/green LED, 200 mm diameter, steel post 2 m height and electrostatic powder coated |
| Hinges | Heavy duty, special design hardened steel |
| Power | 380 V, 3 Phase, 50-60 Hz (or 220 V/ 440 V etc., three phase, 50-60 Hz optional by a transformer) |
| Power failure | Manual hand pump, (or Hydraulic accumulator, DC motor and batteries or UPS, solar panel (optional)) |
| Speed | 3-5 seconds, in emergency 1.5 seconds (optional) |
| Desktop keyboard | Raise, lower, emergency stop, key operated, ‘keyboard in use’ light indicator |
| Extra I/O at the PLC | Enough I/O’s to connect any card reader, extra override keyboard etc. later on |
| Proximity sensor | Available to sense the position of the blocker |
| Dual vehicle safety loop detector | This detector is used for safety |
| Motor Power | Min 3 KW, 1500 rpm |
| Environmental conditions | -25 °C and +65 °C, %95 non-condensing humidity |
| Environmental conditions (optional) | -40 °C and +70 °C, %95 non-condensing humidity |
Optima MHRB Mobile Hydraulic Road Blockers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high security requirements. Even though the attack is from high tonnage vehicles with high speeds, it’s not possible for the vehicle to keep on moving because of the damage given to front, wheels and the bottom of the vehicle. The drive unit is hydraulic, but in case of power failure, road blocker can be lowered or lifted manually with the help of a hand pump. Typical raise/lower time is 3-5 seconds, in case of emergency, raise/lower time can be as low as 1.5 seconds if hydraulic accumulator added to the system (optional).
